VIEW MY

camwebb777

Cam

Gift Premium Subscription To camwebb777

Join Date:

01-03-2015

Last Activity:

09-19-2017 11:28 AM

Likes Given: 24

37 Likes on 22 Posts 

    ABOUT ME

  • Cameron Webb
  • Sydney based PPL - Aerobatics is like golf, most of the time you get it wrong, but get it right once and you can keep going for months
  • Sydney Australia
  • IT

LATEST ACTIVITY

  • Posted in thread: Delta Wing Build on 09-11-2017 at 03:08 AM
    Did my first CNC job this week. For the spar centre sections I made the brackets by hand and
    had them welded. For the butt fittings (and the drag/anti-drag wire blocks) I decided to draw
    them in Sketc...

  • Posted in thread: Delta Wing Build on 09-07-2017 at 11:35 AM
    IStrut holes on the lower wing spars done!! Will do the uppers after I have built the two lower
    wings. They say copying is the greatest form of flattery. Thank you for the method Eric
    (Taff)28195

  • Posted in thread: Delta Wing Build on 09-07-2017 at 06:02 AM
    I've had good success drilling that vertical hole by using a brad point drill. They don't tend
    to wander like a typical drill.Neil agree brad point is ideal. Instead I used an awl with the
    drill in a ...

  • Posted in thread: Delta Wing Build on 09-06-2017 at 10:03 AM
    First holes drilled. These are the lower wing butt ends. Next up is the iStrut holes. Nerve
    racking stuff drilling these things. 28184

  • Posted in thread: Ultimate 10-180 plans on 09-05-2017 at 09:13 AM
    $125 AUD or $125US. That VH reg means your an Aussie right?

  • Posted in thread: Steen Aerolab Wing rib kit on 09-05-2017 at 07:25 AM
    EricHow did you "staple" the trailing edges. Did the stapler just punch through the metal
    trailing edge or did you drill through?Cam

  • Posted in thread: Boom mounted Pitot on 08-27-2017 at 11:19 AM
    Has anyone got a plan on how to mount a Dynon boom AOA/Pitot on a wooden lower wing. I am
    planning on putting one on the left lower wing of my Skybolt, but I note that there is no
    mounting hardware or...

  • Posted in thread: Delta Wing Build on 08-24-2017 at 05:19 AM
    Why are you building the Delta wing?Dennis,1. Increased Gross Weight2. More X-Country Fuel -
    Australia is a big place with nothing in between3. Smaller wing lengths as I am building in a
    small single ...

  • Posted in thread: Delta Wing Build on 08-23-2017 at 09:51 PM
    Opening the crates and doing the inventory is so much fun. Can I say the quality of the work is
    sensational. Here is a few shots of the lower spars. These are the laminated spars and as you
    can see th...

  • Posted in thread: Delta Wing Build on 08-23-2017 at 09:46 PM
    Question: Is there any reason why it would not make sense to fit/drill the butt plates and
    fittings, the internal flying wire hole and plates, the I-strut bolts and the drag anti-drag
    wire holes prior...

0 COMMENTS
POST A COMMENT