• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Lower screen fitting

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chuck

Well-Known Member
Supporting Member
Joined
Sep 1, 2006
Messages
493
Reaction score
69
I have a parallel valve IO-540 (with Barrett cold air sump) and stock Steen engine mount. My previous Skybolt had the Aviation 45 deg fitting on the lower screen for the inverted oil. I am purchasing bits for my project and today’s question is: Does anyone happen to know if the 45 deg fitting is required or can I use a straight fitting from Raven?

Thanks

Chuck
 

Latest posts

Back
Top