• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Rudder Cntrol Cable

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kbaxter327

Well-Known Member
*
Joined
Mar 20, 2008
Messages
200
Reaction score
0
I have a bit of a problem. In routing the cable for my rudder, I am having a conflict with the 2nd to last diagonals. The cable wants to run right up against it. Any suggestions on gettting around this? I considered a cable between the two to pull them in and away from the tubes, but...HELP!!!


Thanks,
 

Latest posts

Back
Top