• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

Drilling Pilot Holes for Anchor Nuts

Drilling Pilot Holes for Anchor Nuts

I already have the match-drilled holes drilled for the hinge on the one elevator. I'm now drilling on the back-side of the metal, through the holes where the rivets go on the anchor nuts. (see Tony Bingelis' book on how to do this - the riveting of the anchor nuts.) After this I'll need to use the counter-sink tool then use cherry rivets to attach anchor nuts to elevators.
There are no comments to display.

Media information

General Biplane Photos
The Tailfeathers
Added by
Date added
View count
Comment count
0.00 star(s) 0 ratings

Share this media