• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Acro II Fittings in CAD

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ethanol1

Member
Joined
Dec 20, 2007
Messages
5
Reaction score
0


This is my first post. I am building an ACRO II and need to start making all the metal fittings. I would like to have them laser cut but need to draw the fittings in CAD to start. Has anyone done this for the ACRO II? I'm trying to save a little time. I've been looking for a source of premade fittings but haven't found any yet.


Mike
 

Latest posts

Back
Top