• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Adhesives for Plexiglas?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Marl

Well-Known Member
*
Joined
Sep 1, 2006
Messages
456
Reaction score
15
Guys---


I'm getting ready to install my windshields and am going to do them the way the Tommy does the Toots (that sounds weird!!)


I've made fiberglass "skirts" for the windshields and have the nutplates installed in the fuselage combing to mount them to---but I do not want to drill the plexi. Tommy showed me at OSH his install --- they bond the plexi to the fiberglas with Redux----don't have any Redux---and really don't want to have to order any (can't find a good source for a small amount---rather spendy for the little I need). Anyone have any suggestions for an epoxy or other adhesive that will bond acrylic to cured MGS epoxy? I've got MGS and can make Flox, etc.... Also have T-88 (I know, I know---it's for wood---but it is one heck of an epoxy!). Any other locally available suggestions??

 

Latest posts

Back
Top