• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

  • If you have bought, sold or gained information from our Classifieds, please donate to Biplane Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Aeroquip Straight and 90 Degree -10 Hose Fittings

hosspowerinc

Member
Joined
Dec 11, 2010
Messages
404
Reaction score
41
Location
Andrews NC
I have a large lot of new Aeroquip -10 straight and 90 degree fittings. They were removed from new hose assemblies whose shelf life had expired. There may be some very light tool marks from removal but the fittings were never used. The part numbers are 526-10D which has been superseded by 816-10D and 8791-10D which has been superseded by 8891-10D . This is a 37 degree flare aviation fitting and the standard size for inverted oil systems. List price is $38.80 for the straight and $86.25 for the 90. Ill sell them for $30 and $65 respectively. Currently I have:
42 Straight
26 Ninety



 

Morphewb

Well-Known Member
Lifetime Supporter
Joined
Jun 6, 2009
Messages
1,955
Reaction score
896
Are these for the Aeroquip 601/AE701 stainless braded hoses?
 

Latest posts

Top