• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Aileron Rib Gusset Shape

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Robin Tripp

Well-Known Member
Lifetime Supporter
Joined
Sep 20, 2006
Messages
373
Reaction score
187
Location
CTF4
Can anyone clarify the shape of the lower trailing edge gusset on the aileron ribs? I can't decipher the drawings.Is it simply a small "L" shape? How far forward and how far up does it go? A photo would be great. I can actually start gluing ribs once I figure this out.
 

Latest posts

Back
Top