- Joined
- Jan 23, 2018
- Messages
- 46
- Reaction score
- 3
Hey Folks! I got my wings and tail rigged close to specs. Problems have been trying to rig the ailerons. I took all the bell crank fittings apart and discovered some problems there and made necessary repairs.
Now before I go any farther I would like some guidance on the proper way to set the entire aileron system up. I started by setting the stick in a vertical position and securing it in place. Then I did some work on the rods at the front of the bell crank so each rod is adjusted 9 inches from the centerline. What are the next steps all the way out to the setting the upper ailerons. HELP!!!
Bill Sullivan
Now before I go any farther I would like some guidance on the proper way to set the entire aileron system up. I started by setting the stick in a vertical position and securing it in place. Then I did some work on the rods at the front of the bell crank so each rod is adjusted 9 inches from the centerline. What are the next steps all the way out to the setting the upper ailerons. HELP!!!
Bill Sullivan
