• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



aileron to belcrank push rod interference

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Manuel Benito

Well-Known Member
Joined
Aug 20, 2006
Messages
89
Reaction score
2
Hi to all


I am fitting the pushrod from aileron to bellcrank and it touches the spar.

You can see how when aileron is neutral, this pushrod touches the spar. When aileron is lowered, clearance is increased, butI can not raise my aileron due to this interference. I have checked dimensions of aileron fittings, bellcrank and bracket and they are O.K, The bellcrank is bended as per plans.


Any idea to fix this "bug" that is making me crazy??


Best regards


Manuel Benito

Edited by: Manuel Benito
 

Latest posts

Back
Top