• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Ailerons and Slot End Ribs

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

deaneborghi

Registered Users
*
Joined
Jan 10, 2009
Messages
178
Reaction score
128
BGL Gang,

Have any of you noticed if these holes are actually cut into the slot end ribs? If yes, are they on the inboard or outboard slot end ribs... or on both?

ps: Do any of you have the plans page for the “standard ailerons” (DWG: OGL-54-2 SHT 5 of 5 STD. AILERON)?? All I have is OGL 54-2A with the Friese Aileron. I’d like to build the standard version. Thx!
E030996E-83C4-4FCF-B68E-8DE994459E3B.jpeg
48F85390-860E-449B-A230-872A483E8F96.jpeg
 

Latest posts

Back
Top