• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



anti drag and drag wire

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

apriester

Well-Known Member
Joined
Dec 17, 2007
Messages
109
Reaction score
1


I was wondering if the jam nut on the drag and anti drag wire inside the aileron cove needs to be doubled with another jam nut or would a little dab of loc tite be fine? The problem is that on the threaded end of some of the wires there is only room for 1 jam nut. all others I was able to double up.
 

Latest posts

Back
Top