I'm in need of a recessed Pitts seat pan. I got a backpack chute and it puts me way too far forward and into the panel. And to top it off I'm 6' tall and a flat bottom seat pan with a standard seat pack makes me sit too high. I know it can only be so deep because of the torque tube but need something somewhat recessed. Seeing if anyone has one available for me to purchase.
-
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.
Anyone with a spare Pitts S1 seat pan?
- Thread starter AASTUNTA
- Start date
- Joined
- Sep 7, 2009
- Messages
- 7,612
- Reaction score
- 5,770
- Joined
- Sep 7, 2009
- Messages
- 7,612
- Reaction score
- 5,770
- Joined
- Feb 28, 2018
- Messages
- 168
- Reaction score
- 185
- Joined
- Feb 28, 2018
- Messages
- 168
- Reaction score
- 185
