• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



B&C Starter clearance issue

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Redwood1169

Well-Known Member
Supporting Member
Joined
Jul 4, 2016
Messages
184
Reaction score
58
Anyone have a B&C and run into this issue? As you can see from the pic, it won't quite reach cutoff before hitting. Thought it was going to be an easy swap. It looks like the arm has been trimmed down some in the past for the old starter.

Any thoughts?

Thanks

IMG_3933.jpg
 
Last edited:

Latest posts

Back
Top