• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Boost Pump Location

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AlRice

Well-Known Member
Joined
Aug 18, 2006
Messages
262
Reaction score
0
I'm welding in the mounts for my boost pump (fuel injected) and need to know if I'm on the right track. I'm mounting the boost pump behind the firewall and the gascolator in front of the firewall. So my fuel line will go:
*From the tank to the selector valve
*Through the firewall to the gascolator
*Back through the firewall to the boost pump
*Through the firewall again to the engine fuel pump. That's 3 penetrations of the firewall. Does this sound correct?
Al

 

Latest posts

Back
Top