• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Bungee cords for the S1S Pitts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dave Baxter

Well-Known Member
Lifetime Supporter
Joined
Nov 14, 2007
Messages
3,365
Reaction score
3,157
Bill Rose or Jim Stanton. Had A guy wanting to borrow my tools to install bungee cords, and he said that according to Aviat that 4 ea 1380s were what is called out for on the single place Pitts. I would think based on my experience that this would be overkill, and that one might as well weld the gear as they would not give much? Just thought I would ask those in the know if these are indeed the correct cords for the S1S Pitts? This is what A/C Spruce has listed in their catalog also. Dave
 

Latest posts

Back
Top