• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Bungee Gear Attachment Bolts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chuck

Well-Known Member
Supporting Member
Joined
Sep 1, 2006
Messages
493
Reaction score
69
What size bolts are used for the bungee gear attachment? -4 or -5? I thought my project had the gear attachments fully ready to go and the bracket holes fit a -4 but that size feels sloppy in the actual gear leg. Is this correct or should I ream out the bracket for a -5? I assume the gear legs are stock from Steen Aero.
 

Latest posts

Back
Top