• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



CAD Drawings for my Plasma cutter

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fishead

Registered Users
Joined
Dec 18, 2008
Messages
111
Reaction score
12
I have a great opportunity! A very good friend just set up his CAD driven plasma cutter and we intend to do all the fittings on it.I am doing the D model and have the supplement with all the CAD drawings. The only ones that I cannot find are the landing gear and flying wire attatch fittings. Does anybody know where they are or have a copy they can send me.


We did some testing yesterday on some parts we just made up and it works great.We used 1/8 inch steel for the experiment. I intend to have a whole library of the fittings on Cad in the machines computer.
 

Latest posts

Back
Top