I seem to have lost my sheet metal edging tool used to put the slight bevel on overlapping sheet metal seams. It was a small pair of pliers with a bearing welded to each jaw at an angle with an edge guide on each bearing. Rolling this on the edge of sheetmetal several times squeezing the handles harder at each pass put a very nice 3-4 degree bevel on the edge.
I have been searching the web for the last 2 hrs. trying to find another one or something similar and all I find are bench mounted, crank machines.
If anyone has any idea what I am talking about - considering my poor description - can you steer me in the correct direction ?
The one I had was purchased from a dealer specalizing in sheet metal hand tools at Oshkosh many years ago.
Thank you
I have been searching the web for the last 2 hrs. trying to find another one or something similar and all I find are bench mounted, crank machines.
If anyone has any idea what I am talking about - considering my poor description - can you steer me in the correct direction ?
The one I had was purchased from a dealer specalizing in sheet metal hand tools at Oshkosh many years ago.
Thank you