- Joined
- Sep 7, 2009
- Messages
- 7,612
- Reaction score
- 5,769
ok, well on mikes advice im starting my own build thread. good luck on the mini mike, was looking forward to a counter part on an as2 build but you fell into one heck of a deal man, good for you! anyways, i got all of the "stick" parts for the ribs cut, labeled, and separated in bags for ease of assembly. im going tomorrow down to the shop to pick up the rest of the ply and spruce from the laser cutter, then its assembly time. im planning on the weight system to build the ribs and i have 40 pieces of round stock cut to 1.5 in. diameter x 2 in. length. i prebent the top and bottom cap strips using a jig made out of a 4x4. soak them in the tub and clamp them in until dry. been reading alot on here and thanks for everyones advice! already read all of and printed several articles from the a.s. newsletters. what a great resource this is. heres a few photos to start with, more to come! let the adventure begin.......
Now thats what i call woodworking!!
Thanks Christian!!
Edited by: smizo
Now thats what i call woodworking!!
Thanks Christian!!
Edited by: smizo
Last edited by a moderator: