• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Conduit? Wire tray? trying to neaten up

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Pinballwizzard

Well-Known Member
Joined
Nov 13, 2007
Messages
59
Reaction score
0
I am most likely not going to install interior panels on the sides of my Acrosport II cockpit which means the wires will be visible. In the rear cockpit that will be the trim servo wires, autopilot pitch servo wires, and battery leads. For the front it means battery leads and all the ignition/starter/EMS etc leads. I don't see any discussions on hiding those wires. Nor do I see any immediatly ready product other than maybe split loom but I am not sure how suitable it is for aircraft. Any experience on this would be great!
 

Latest posts

Back
Top