kpin
Well-Known Member
- Joined
- Jul 27, 2009
- Messages
- 155
- Reaction score
- 1
The radio in my Skyolt is an old Edo Aire 553A. It was not working well and I believe the problem was the center wire connection of the coax cableto the tray, it had become detached hence nosignal. This connector is strange to me.It looks like the center conductor should be strippedwith some insulation left to insulate from the ground cap thatthe shield is then soldered to while the center conductor is soldered to the center terminal. If any one can make since out of this or isfamaliar with the connector I would like to know If I am correct in my method of connection? I know I am not very clear. It is hard ot explain but any help would be appreciated.
Ken
Ken
