• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Continental A-65 Basket Case

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Aananda

Registered Users
Joined
Nov 3, 2012
Messages
88
Reaction score
3
Location
Eureka Springs
Shortly I will begin assembling an old A-65. I have an overhaul manual but am having difficulty finding a certain piece of information. I have the four pushrods and caps, each are matched by number. However, I cannot find anything that tells me if these pushrods go in any specific order on the crankshaft. Could someone tell me they are required to be mounted in a specific numerical sequence?
 

Latest posts

Back
Top