• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Custom fixed pitch prop guidelines

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AzAero

Well-Known Member
Supporting Member
Joined
May 31, 2019
Messages
70
Reaction score
50
Location
Arizona
Looking for advice in regards to having a prop built (Catto 3 blade} for my S2E project. At this point just going back and forth getting them general information. A specific pitch and length hasn't been recommended yet, but a target design RPM of 2800-2900 RPM WOT straight and level flight has. My mission for this aircraft will be mostly short flights/basic aerobatics and occasional short hop $100 hamburger, etc. Stock airframe with 200hp IO360. Opinions and advice appreciated.
 

Latest posts

Back
Top