• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Drag/Anti-Drag Pull Block Locations

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Steve03G

Well-Known Member
Lifetime Supporter
Joined
Oct 4, 2014
Messages
49
Reaction score
26
I'm getting setup to glue my pull blocks in place. Per the plans correction, they are centered on the cord (1 9/32 up from the bottom of the spar). At the aileron bay, the pull blocks just don't look right.

Is this right?

20151101_095539.jpg

20151101_095559.jpg

If it is, then I'll put a piece of wood in between so they have something to compress on. I haven't checked aileron clearance, I know I'll have to shave them down but something seems off to me.
 

Latest posts

Back
Top