• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Elevator and servo tab control horns.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gha111

Well-Known Member
Supporting Member
*
Joined
Apr 7, 2008
Messages
257
Reaction score
84
On the AS1 there are 3 holes on the elevator horns, 1 AN3 and 2 AN4. My question is has anyone used the bottom AN4 hole that would make the elevator less sensitive or does everyone use the top hole? Also, the servo tab control horn has 4 holes. Which hole is recommended and why. I don't see anything in the plans.
Thanks, Garry
 

Latest posts

Back
Top