• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



elevator

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jeff

Active Member
Joined
Sep 26, 2007
Messages
30
Reaction score
0
Having a little trouble discerning what fitting/bushing, fits in the elevator spar (horn)and thru the 3/8 bushing on the bracket attached to the rear horizonal stabalizer support.This would be what supports the inboard end of the elevators.


The plans don't really show anything,I also have the SteenCD-ROM with construction pics, I can see some kind of bushing in the tubeagainst the tab.


Any help appreciated,


jeff @ INDY
 

Latest posts

Back
Top