• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Engine mount isolation mounts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JonC

Registered Users
Supporting Member
*
Joined
Nov 3, 2013
Messages
16
Reaction score
5
Hi,
I'm in the process of mounting a Lycoming IO-360 A1A 200HP engine to my Skybolt. I have purchased the dynafocal ring from Aircraft Spruce (part #33521) with the 2 3/4" retaining cups. I am trying to find out which Lord, Barry or other isolation mounts will be suitable - there seems to be a lot of info out there but I can't match it with my situation. Does anyone have any experience with my setup?

I include some photos of the project to date...lower and upper wings ready to cover! :)

Many thanks
Jon

IMG_4512 2.jpg


IMG_0932.jpg


IMG_4495.jpg
 

Latest posts

Back
Top