• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Factory S-2 Canopy - Please Explain the Problem

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cwilliamrose

‍‍‍‍‍‍‍‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ 
Lifetime Supporter
Joined
Nov 10, 2009
Messages
10,572
Reaction score
3,282
Location
SW Florida (94FL)
These two place canopies have a tendency to self-jettison. Since I have very little experience with this type of canopy I don't really understand why they leave the airplane so often. I hope someone can explain what causes this to happen and what might be done to improve or eliminate the issue (from a non-certified airplane).

Also, when it does jettison (either by accident or on purpose), what path does it take? Does it tend to clobber the rear seated pilot on the way off or is it well clear of occupants during its departure?
 

Latest posts

Back
Top