• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Filling small voids in poly fiber after silver coat

Shop deals on ebay
shop deals on amazon
Advertise with us
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Cub822

Cub822

Well-Known Member
Supporting Member
Joined
Sep 30, 2019
Messages
206
Reaction score
149
Location
California
Covering aPitts fuselage,
There’s a seam down the top of the turtleneck where fabric halves meet was trimmed. I thought tape would bridge and cover the very narrow gap.
After final coat of silver gap is still apparent.
Any way to fill the slight depression prior to paint? (I’m finishing the fabric in poly tone not urethane if that matters)

thanks,
Doug
 
You must log in or register to reply here.

Latest posts

Back
Top