• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

Generic rigging boards

Larry Lyons

Registered Users
Lifetime Supporter
Joined
Oct 1, 2012
Messages
5,121
Reaction score
1,549
Location
NW Illinois
Here is what I built out of 1" square aluminum tubing. One thing I would change if I needed to use these much is the trailing edge bolt and swivel. These have too much wobble available and have to be "set" each time. They will fit most any wing as you can make the over all length anything you want as well as making the vertical sections any length you need too.
 

Attachments

  • Rigging sticks.jpg
    Rigging sticks.jpg
    92.7 KB · Views: 0
  • Rigging sticks2.jpg
    Rigging sticks2.jpg
    1.1 MB · Views: 0
  • Rigging sticks3.jpg
    Rigging sticks3.jpg
    565.4 KB · Views: 0
  • Rigging sticks4.jpg
    Rigging sticks4.jpg
    1 MB · Views: 0
  • Rigging sticks5.jpg
    Rigging sticks5.jpg
    1.1 MB · Views: 0
  • Rigging sticks6.jpg
    Rigging sticks6.jpg
    860.5 KB · Views: 0
  • Rigging sticks7.jpg
    Rigging sticks7.jpg
    1.1 MB · Views: 0
  • Rigging sticks8.jpg
    Rigging sticks8.jpg
    804.8 KB · Views: 0
  • Rigging sticks9.jpg
    Rigging sticks9.jpg
    843.2 KB · Views: 0

Latest posts

Top