• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Glueing Leading Edge

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MarkRadio

Well-Known Member
Joined
Aug 8, 2007
Messages
145
Reaction score
2
I'm making progress on bottom wings, to a point that I'll be putting plywoodon leading edges. My problem is that I've made the wings on the rackssuggested [which was fine] except now how do I put leading edges on and keepwing in the correct position , level etc. There has to be another rack or somethingI'm not seeing. the drag/antidrag wires are on and tightened up. Again, hope this makes sense and thank you
                                           Mark
 

Latest posts

Back
Top