• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

  • If you have bought, sold or gained information from our Classifieds, please donate to Biplane Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Governor Cable

Skybolt31

Registered Users
Joined
Aug 28, 2006
Messages
1,287
Reaction score
333
I had this Cable made by Aircraft Spruce and ended up using something different. It is 77 1/2 inches long and has a 10-32 threaded end. $50 with shipping to the lower 48

ImageUploadedByBiplane Forum1439679784.124034.jpg
 
Last edited:

Cameron

Well-Known Member
Supporting Member
Joined
Feb 1, 2007
Messages
2,791
Reaction score
1,029
Do you know if this is longer or shorter than a stock Eagle cable?
 

Cameron

Well-Known Member
Supporting Member
Joined
Feb 1, 2007
Messages
2,791
Reaction score
1,029
I did a little measuring this morning. Doesn't look like this will work for me.
 

Skybolt31

Registered Users
Joined
Aug 28, 2006
Messages
1,287
Reaction score
333
If you are using a rear governor it is the right length but it does not have the threaded end on the casing so it can't be used (easily) with the stock bracket
 

Latest posts

Top