• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Haigh tailwheel dolly

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ultimate200

Well-Known Member
*
Joined
Apr 29, 2012
Messages
363
Reaction score
354
I have to pull my Ultimate bipe up a grade to put it back in my hangar so i came up with this setup.I wanted something more secure than the other dolly designs that scoop up the tailwheel.I tig welded a small length of 1/2" od by 3/8" id tubing on the tailwheel housing making sure it didn't interfere with anything.I can move it around by hand and also hookup to my 4 wheeler.It works great.



IMG_0366.JPG


IMG_0368.JPG


IMG_0373.JPG


IMG_0372.JPG



IMG_0375.JPG
 

Latest posts

Back
Top