• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



"I" Strut Bolts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dave Baxter

Well-Known Member
Lifetime Supporter
Joined
Nov 14, 2007
Messages
3,365
Reaction score
3,157
Does anyone know the exact length of the 1/4 AN bolts that are required for the Skybolt, the ones that pass vertical through the front and rear spars on the upper and lower wings that attach the "I" strut to the spars? The exact AN-4 - ? Would be much appreciated! I would think Steen Aero Lab would know? Also When I rigged it prior to cover I have one large area washer a AN 970-4 in between the "I" strut and the wing spar, and I am aware that they can be removed or added to, if necessary to get the correct wing incidence. Dave

SAM_2305.jpg
 

Latest posts

Back
Top