• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Inspection hole for elevator connection

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 7, 2018
Messages
18
Reaction score
0
Hello everyone!
Regarding my S2a:
Finally finished the welding of my Tailpost:
20210421_163101.jpg

After Painting and putting fabric to one side:
20210607_172942.jpg

20210607_172845.jpg
I'm stuck at the question
what is the best solution for Inspection holes to allow easy mounting of the elevator and do the preflight check? Is there an additional inspection hole recomended to get access to the area underneath the elevator? Some pictures would be great, as this area is often not in the focus:oops: on the photos I found!
Thank you very much in advance!
Jochen
 

Latest posts

Back
Top