• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Instrument mounting hardware

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Skybolt31

Registered Users
*
Joined
Aug 28, 2006
Messages
1,380
Reaction score
410
I have brass screws and nuts with some sort of black coating on them for mounting the instruments but I do not have any brass lockwashers. I do have some stainless ones that are non magnetic. Is there anything else to this brass instrument hardware rule that I am missing or should I just go ahead with the stainless ones?
 

Latest posts

Back
Top