- Joined
- Nov 16, 2006
- Messages
- 69
- Reaction score
- 0
Hi all
I'm about to start welding up the landing gear truss and wanted to know if anyone has any suggestions on were best to drill holes,in the tubing,to allow the oil to flow for internal rust prevention.
Or if in factinternal rust prevention is required.
Cheers Paul
I'm about to start welding up the landing gear truss and wanted to know if anyone has any suggestions on were best to drill holes,in the tubing,to allow the oil to flow for internal rust prevention.
Or if in factinternal rust prevention is required.
Cheers Paul