• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Internal rust prevention

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paul

Well-Known Member
Supporting Member
*
Joined
Nov 16, 2006
Messages
69
Reaction score
0
Hi all
I'm about to start welding up the landing gear truss and wanted to know if anyone has any suggestions on were best to drill holes,in the tubing,to allow the oil to flow for internal rust prevention.
Or if in factinternal rust prevention is required.


Cheers Paul
 

Latest posts

Back
Top