• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



laser-cut plywood

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yanekm

New Member
Joined
Sep 8, 2007
Messages
4
Reaction score
0
Rick Cordary at Edco.com cut out some gussets for me. Sure is faster than cutting them all out by hand, and each one is precisely the shape and size to fit its spot...

20070912_195113_lasercut.JPG


... the bits of edge that show in some of the holes are not wood, the wood ends up perfect, it's strips of a masking-tape-like screen they put on both sides of the sheet to protect the wood from burning ...

<beej/edited to fix img link>
 

Latest posts

Back
Top