• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Latex paint again

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sarpysam

Well-Known Member
*
Joined
Aug 18, 2013
Messages
59
Reaction score
6
Thanks for all the response on the latex paint question. Seemed to be about 60/40 for the latex based upon potential sale value. At any rate, I finally decided to jump on the latex.

I’ve encountered too much orange peel @ this stage. I cut it about 15% with distilled water and used about 3 turns on the flow. Do I need more flow or should I cut it some more with water?

Sarpy Sam
 

Latest posts

Back
Top