• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Leading edge material application technique

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bikerabbi

Member
Joined
Nov 16, 2011
Messages
6
Reaction score
2
John, for leading edge material I plan to go with 1/16" mahogany. I did a test wrap with a small piece. It is a VERY sharp bend. Would you go with one piece after wetting it and forming it around the edge, or should it be two pieces with an overlap by the top piece?
Thanks,
GB
 

Latest posts

Back
Top