• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Leading edge Plywood

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ron Southard

Well-Known Member
Supporting Member
*
Joined
May 4, 2009
Messages
46
Reaction score
2
I'm about to start wing assembly on our Classic and having a time deciding on a plywood source. I've used some 1.5mm from Anderson International, foranother application, it was perfect.A fellow Hatz Classic builder Scott Plischke was kind enough to send me a sample of his Birch ply from ACSthat isaround 40 yrs. old and seems much stronger then Andersons. I ordered 2 new 1/2 sheets of 1.5mm Finnish Birch G-2 rated from ACS and they just arrived. Now I'm even more undecided as it seems stronger but has many knots and just not what I want to use for our leading edges.
I did build a mock-up of a leading edge section and used Andersons ply on it and it actually came out much stronger then I expected. The 1/16 Mahogany plywood I have from ACS seems even harder then their Birch for some reason and I really like howstrong Mahogany glue joints are as well.


Can you experienced builders / restorers give me your opinions on types and sources of aircraft plywood for the leading edges?


The Classic's leading edgeis designed to bein twosections vs one continoussection that would go all the way around the top and bottom of the leading edge, so steaming the plywood is not needed. The plywood sections join at a leading edge molding, much like the Stearman form all understand. I plan on doing gentle aerobatics in the Hatz but I think my main concern is having a strong leading edge for the usual ground handling issues and bird strikes.


Any input is greatly appreciated
 

Latest posts

Back
Top