• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Long brace wires

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 16, 2013
Messages
914
Reaction score
428
Location
Fargo, ND
All: Looking for input on a possible solution to these brace wires. In particular the forward 4 flying wires are too long, labelled and confirmed at 96 inches overall. Correct length would be 95". The picture shows the fit when the clevis end is bottomed on the threads with the jam nut removed. Any suggestions other than buy shorter wires?

20221126_112521.jpg
 

Latest posts

Back
Top