• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Looking for pics of welded rudder on a Classic.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Beechdrvr

HC#160
Joined
Mar 9, 2020
Messages
41
Reaction score
10
Location
Ct
Hi All,
Having a bit of a time deciphering the plans of the Hatz Classic. Particularly the joint between the rudder bow and the vertical tube at the top. The plans show its some how flared out to accept the 3/8ths tubing but Im having a hard time picturing how this is done. Any help with a pic would be greatly appreciated.
Thanks in advance.
Doug
 

Latest posts

Back
Top