• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

  • If you have bought, sold or gained information from our Classifieds, please donate to Biplane Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Lycoming oil-sump #74664

helishaun

Helishaun
Lifetime Supporter
Joined
Apr 18, 2012
Messages
7
Reaction score
0
WANTED.Is there anyone who has upgraded their IO360 to a cold air induction system,who has a Lycoming sump #74664 which he would be prepared to sell?
If so,please would you contact me at the following e-mail address:[email protected]
Kind regards,
John Powell.
 

cashflyer

Well-Known Member
Joined
Aug 10, 2011
Messages
1,326
Reaction score
404
I have a Lycoming sump but the data tag was removed years ago and I don't know the PN. There is a casting number on the bottom; maybe you can identify it from that?
The number is A-78900
 

helishaun

Helishaun
Lifetime Supporter
Joined
Apr 18, 2012
Messages
7
Reaction score
0
Thanks very much for your reply.I'm nowhere near an expert with regard to these sumps,but will most certainly try to find out if your sump is suitable.I'm sure that one can identify your sump,but it may take a few days.
Kind regards,
John.
 

Cubcrazy

Well-Known Member
Joined
Jul 13, 2008
Messages
64
Reaction score
13
Hi John, Is this the Sump that is called the "Bat Wing Sump"?
I have a IO-360 Sump that has the fuel servo mounted on the front,but no tubes
Also located in JHB.
Ben
 

helishaun

Helishaun
Lifetime Supporter
Joined
Apr 18, 2012
Messages
7
Reaction score
0
Hi Ben,
I believe so.Do you have a photo of your sump.
Please contact me on 0829620401.
Kind regards,
John.
 

Latest posts

Top