• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Miller Syncrowave 200

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CharlieF

Well-Known Member
Joined
Dec 11, 2008
Messages
80
Reaction score
0
Still researching welding machines. Based on some discussion in other threads, I've ruled out the Diversion and am looking for a used, higher line machine (garage building, though).
There's a Miller Syncrowave 200 available locally with regulator (no bottle), torch and foot control. It seems like a nice, modern machine with a low end of 5A.
Worth a look?

Charlie


 

Latest posts

Back
Top