• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Nav and Strobe Wire Routing

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bdalporto

Well-Known Member
*
Joined
Oct 23, 2007
Messages
71
Reaction score
13
I'm nearing the completion of my wing rebuilding efforts on my Marquart Charger. I added wing tip strobes and nav lights to the upper wings. I'm not sure how to route the wires from the upper wing to the fuse. I'm thinking of drilling holes in the inboard N struts, top and bottom, and routing the wires inside. Any thoughts on this or any other suggestions? How have other people done this. Any pictures would be a big help.

Brian
 

Latest posts

Back
Top