• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

  • If you have bought, sold or gained information from our Classifieds, please donate to Biplane Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Need a Spinner

dcrowe1

N6XL
Joined
Feb 2, 2010
Messages
143
Reaction score
23
Location
mcallen, tx 78501
My spinner back plate just cracked and I'm looking for a replacement of the back plate or of the complete unit.
The current spinner is 12" with the back plate having a center hole of 2 5/8".
My motor is a IO-360. bolt holes are 3/4", 6 bolt pattern.

What is the best option for replacement? I have a wood Sincinich prop, I have not measured the prop thickness but will do that tomorrow.
Thanks
Don Crowe
 

biplanebob

Member
Supporting Member
Joined
Aug 22, 2006
Messages
1,214
Reaction score
583
Location
KLNS
Don,

check the Aircraft Spruce & Specialty catalog. You may have one of their spinners.

The model BN-3 spinner lists a diameter of 12 1/16"

Bob
 

sherpat

Registered Users
Joined
Mar 27, 2014
Messages
31
Reaction score
1
hi i have a new spinner from vans aircraft 12 ' by 12 'has both plates,,bolts ,screws ,,200.00 plus frgt ,,adam at 870-830-7969
 

paulyardy

Registered Users
Joined
Oct 3, 2014
Messages
18
Reaction score
0
I have a perfect condition backplate available. See attached picture for size which I appears close to 13 3/4 " depending on where you measure.

Also have the spinner but that is slightly bent.

Paul

Spinner backplate.jpg
 

Latest posts

Top