• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



need your expertise for my engine

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jacques

Active Member
*
Joined
Sep 21, 2008
Messages
25
Reaction score
0

<div id="result_" dir="ltr">Voila, I have an engine IO-470 D 1073H since factory rebuilt in 1966 and I would like to rebuilt for my skybolt.

I have disassembled the engine and before changing old fornew parts, I would like to know what I have to do.
<div dir="ltr">
<div dir="ltr">Here in France, for TCM parts, even with a low rate for US$ change, it is very expensive.
<div dir="ltr">
<div dir="ltr">I have some pictures.
<div dir="ltr">
<div dir="ltr">For exemple, I have a fuel flow divider on my engine without any part number, just AP 744 and I do not know about this part.
<div dir="ltr">
<div dir="ltr">
20090925_021635_CIMG6672.JPG


Edited by: macwolf
 

Latest posts

Back
Top